[Benas09]

Hello.
I would like to share custom brackets for amplifier mounting which I have created.

They can be printed with 3d printer. I used PET-G, because I think PLA can deform in a car on hot days.

Simply slide 3 brackets on mushrooms, then fasten polycarbonate sheet or some other material on them. I used 4mm

I used 4mm sheet and 4.8x22 self-drilling screws (DIN7981C), so I had print spacer rings also.

You can download STL files here:

https://www.thingiverse.com/thing:6591629