[legaleye3000]

So far I have everything working again. Office showed up and the Bluetooth options showed. The sub functions of office didn't yet show up, such as SMS etc, but I'm going to see if it works next time I turn on the car. The Bluetooth options weren't there before so I think that's a good sign.

[shawnsheridan]

Originally Posted by kromix

hey shawn,

Would you happen to know of the top of your head if a '13 F25 X3 can be coded with the same cable and software as my F30? I'm assuming yes?

Thanks!

Yes. No problem. ENET is good for both.

[YMB-M3-J2]

Originally Posted by 10nelyboi

frogman,
thanks for clarifying, I too got the same error whenever trying to code "fem_body" . how do I test if my adaptive head lights still work?
I tested by parking in the garage with the head light on, I was able to see the lights turns as I turned the steering wheel; however I tested again this morning and the light didnt turn. so now im confused..

Just to follow up on this... i did the "code" to turn the entire FEM BODY module back to original and BAM... adaptive headlights starting working again.. i then did the below to kill the cornering/reverse fogs. It worked like charm and my adaptive headlights are still working properly.

3073 - C_CLC_ENA = F020disable disabled both cornering fog lights AND the fog lights from turning on when reversing.

[npgatech]

Originally Posted by bmw328jc

I am having this same problem. I thought it had something to do with turning off the fogs on cornering. Maybe we should revert everything back to factory settings and then re-code to see if it happens again? Does anyone have any ideas??

I got it fixed. I don't know which parameter caused it (see below for Shawn's reply with the parameter name. That's probably it, but I never changed those parameters. Not sure how the Adaptive lights got disabled).

I was able to fix it by clicking the root folder, right click ---> "Code". This reset the whole car (all modules) to default values based on my VO.

Tested it out today, the lights turn as expected.

Originally Posted by 10nelyboi

I received the same error "adaptive lighting malfunction" when I coded turn signal blink, ambient lighting brightness and ambient lighting not controlled by cluster lighting. I think the error comes up every times you code the lighting function. luckily my head lights still turn when I turn the steering wheel.

This error comes up when I code "KOMBI" module I think.

Originally Posted by shawnsheridan

C_BLC_ENA = F030disable - Switch to disable BLC (Adaptive Head Lights, aka AHL)

C_CLC_ENA = F030disable - Switch to disable CLC (cornering fog light)

Damn...good to know, Shawn!

[clarence]

Originally Posted by legaleye3000

So far I have everything working again. Office showed up and the Bluetooth options showed. The sub functions of office didn't yet show up, such as SMS etc, but I'm going to see if it works next time I turn on the car. The Bluetooth options weren't there before so I think that's a good sign.

Can u post a list of all the individual entries u've made when starting afresh?

[10nelyboi]

Shawn,
I noticed on the other forum that 49.4 Psdzdata has come out, will that apply to F30 owners as well ? if so, where can I download it?

[shawnsheridan]

Originally Posted by 10nelyboi

Shawn,
I noticed on the other forum that 49.4 Psdzdata has come out, will that apply to F30 owners as well ? if so, where can I download it?

Yes it applies to all Fxx chassis, although F30 chassis had no I-Level update in 49.4.

You don't need it though unless you are programming a car with 49.4 on it.

[kromix]

Anyone know if you can code this?

- Change sensitivity of Auto-Headlights? I don't want the Xenon's to come on when it's still so bright outside on the Auto Setting. Would like for the DRL's to be on longer into dusk and have the Xenons turn on when its actually dark outside :P

[shawnsheridan]

Originally Posted by kromix

Anyone know if you can code this?

- Change sensitivity of Auto-Headlights? I don't want the Xenon's to come on when it's still so bright outside on the Auto Setting. Would like for the DRL's to be on longer into dusk and have the Xenons turn on when its actually dark outside :P

For F10, you can adjust the sensitivity with these Junction Box settings:

JBBF->3530 RLS, 0C->RLS_DEF_FLC_SCHWELLWERT_SATZ-> unempfindlich (default is empfindlich)

JBBF->3530 RLS, 0C->RLS_FLC_SCHWELLWERT_SATZ unempfindlich (default is empfindlich)

The "official" BMW way for both F10 and F30 to change the light control sensitivity is to use K-Words FLCN and FLCS:



I have not tested them though, and the underlying FDL Changes may be the same JBBF codes above.

[kromix]

Originally Posted by shawnsheridan

For F10, you can adjust the sensitivity with these Junction Box settings:

JBBF->3530 RLS, 0C->RLS_DEF_FLC_SCHWELLWERT_SATZ-> unempfindlich (default is empfindlich)

JBBF->3530 RLS, 0C->RLS_FLC_SCHWELLWERT_SATZ unempfindlich (default is empfindlich)

The "official" BMW way for both F10 and F30 to change the light control sensitivity is to use K-Words FLCN and FLCS:

Attachment 870267

I have not tested them though, and the underlying FDL Changes may be the same JBBF codes above.

So you would either set it to "Very Sensitive" or "Normal" and I'm assuming default is normal, so I wouldn't accomplish what I want with that avenue...

I don't get the unempfindlich (default is empfindlich), so thats also Sensitive or "insensitive", i'm assuming its already defaulted to insensitive, so I think I can only make it more sensitive then what it already is...

[shawnsheridan]

Originally Posted by kromix

So you would either set it to "Very Sensitive" or "Normal" and I'm assuming default is normal, so I wouldn't accomplish what I want with that avenue...

Well, if you choose to assume that the underlying coding default is for Normal operation, then I guess not. Myself, I assume nothing about these cars when it comes to coding, and I test everything to prove it out. Nothing ventured, nothing gained.

[Frogman]

Originally Posted by kromix

So you would either set it to "Very Sensitive" or "Normal" and I'm assuming default is normal, so I wouldn't accomplish what I want with that avenue...

I don't get the unempfindlich (default is empfindlich), so thats also Sensitive or "insensitive", i'm assuming its already defaulted to insensitive, so I think I can only make it more sensitive then what it already is...

For the F30, the setting is: FEM_BODY / 3130 / RLS_DEF_FLC_SCHWELLWERT_SATZ

For me (F30 with I-step F020-12-11-504) the default is "normal". They may have changed the default in other I-steps.

The other options are:

empfindlich (sensitive)
sehr_empfindlich (very sensitive)
unempfindlich (insensitive)
Tagfahrlicht (DRL)

[shawnsheridan]

Originally Posted by Frogman

For the F30, the setting is: FEM_BODY / 3130 / RLS_DEF_FLC_SCHWELLWERT_SATZ

For me (F30 with I-step F020-12-11-504) the default is "normal". They may have changed the default in other I-steps.

The other options are:

empfindlich (sensitive)
sehr_empfindlich (very sensitive)
unempfindlich (insensitive)
Tagfahrlicht (DRL)

Based on the FDL Codes, yes, which is why I wrote to change them to unempfindlich (insensitive).

As for the BMW way, by default a VO contains no K-Word for sensitivity, so until one actually tests K-Words FLCN and FLCS, there is no way of definitively knowing if using these set the same JBBF / FEM_BODY FDL Codes, and if so, which K-Word equates to which FDL Code.

[john08135i]

Shawn.. help I just got my car back from the dealer and it seems the upgraded my SW again.
missing
cafd_000000f9-007_006_059 fehler:
cafd_000000f9-007_006_059 not found

where can I get the newest SW and I was the first one to buy the token months ago.

[shawnsheridan]

Originally Posted by john08135i

Shawn.. help I just got my car back from the dealer and it seems the upgraded my SW again.
missing
cafd_000000f9-007_006_059 fehler:
cafd_000000f9-007_006_059 not found

where can I get the newest SW and I was the first one to buy the token months ago.

PM sent.

[john08135i]

Thanks DL now and waiting on a reply from Adrian.

[shawnsheridan]

Originally Posted by john08135i

Thanks DL now and waiting on a reply from Adrian.

Adrian?

[john08135i]

andreas.. he said I don't need newer software..just the files..do I delete all old ones or choose overwrite?

[shawnsheridan]

Originally Posted by john08135i

andreas.. he said I don't need newer software..just the files..do I delete all old ones or choose overwrite?

Yes, just replace two patched .jar files, and then in E-Sys options, change the EST location to point to your new .EST Token file.

[avgor123]

Originally Posted by Frogman

For the F30, the setting is: FEM_BODY / 3130 / RLS_DEF_FLC_SCHWELLWERT_SATZ

For me (F30 with I-step F020-12-11-504) the default is "normal". They may have changed the default in other I-steps.

The other options are:

empfindlich (sensitive)
sehr_empfindlich (very sensitive)
unempfindlich (insensitive)
Tagfahrlicht (DRL)

Hi!

Which option I need to choose to headlight switch on at more dark conditions instead of "normal" - "very sensitive" or "insensitive"?

[shawnsheridan]

Originally Posted by avgor123

Hi!

Which option I need to choose to headlight switch on at more dark conditions instead of "normal" - "very sensitive" or "insensitive"?

Right now, your lights are coming on when it is still too light out, so your sensors are too sensitive, so you would set it to "insensitive" to decrease the sensitivity.

[kromix]

Hey guys, anyone have any idea on this or atleast where to look to test?



From a locked turned off car state,

When on Setting #3 (Auto Headlamp control), and I unlock my car the "Angel Eyes" or "Corona Rings" illuminate & stay on and the turn signal indicators flash.

When on Setting #4 (Lamps Off/DRL) and I unlock my car the "Angel Eyes" or "Corona Rings" do not illuminate & stay on, but only the turn signal indicators flash.

Is there a way via coding to enable the illumination of the "Corona Rings" on Car Unlock when in Setting 4?

I'm guessing I'd have to find an area that has to do with the individual lamp settings 3/4/5/6, just not sure where to look?