[GhostyM]

I'm getting my EBII M-sport 335i soon. It's on the boat.

I can't find any F30 with 19x9.5 +30 front and +22 rear being a square setup..

Or running 19x9.5 +30 and 19x11 +25 in the rear?

Is it possible with rolling the fender?

Or should I stick to the boring, typical 19x8.5 +37, 19x9.5 +33?

[Waterbelly]

I run 19x9.5 +38 in the rear, and am about 4mm outside of flush (no drop on the car).

So your 19x9.5 +33 rear is not really "the boring, typical" fitment. It is very aggressive.

And 19x11 +25? Don't even think about it. Your car will look like a top fuel eliminator.

Matt

[JNM3]

19 x 9.5 + 30 is a bit too aggressive IMO. 19 x 9 +30 wouldn't be bad in the front or if square then like 19 x 9.5 +38 or +35ish maybe.