Hi guys,
I was able to secure some dyno time this weekend and I threw my 2013 335i M Sport on for some testing. Overall, I was extremely pleased on how my car ran and it even out performed some of the figures I had in my head. I was able to hit that 400whp club on stock turbo
I will get to the good stuff first. Car is equipped with a 6 speed MT, full bolt ons (minus FMIC), running ~e40 mix and JB4.
Best pull was 400whp, 473wtrq. I baselined on this SAME dyno bone stock with 273whp, 298wtrq. These are gains of 127whp and 175wtrq. 
Here is the video of the pull:
Here is the log from the best pull. Running map 7
I did another dyno run directly after (still on map 7)...numbers were slightly lower due to heat soak.
Baseline Run FBO vs. Map 7.
STOCK DYNO SHEET
---------------------------------------------------
After this I decided to do some independent dyno testing with my JB4.
*Please note the below runs contained e40 (aside from stock baseline number which had 93 pump gas.)
If you are running straight pump gas, expect the numbers to be lower.
Here are the results:
Bone stock: 273whp, 298wtrq
FBO Stock Boost: 311whp, 322wtrq
Map 1: 354whp, 384wtrq
Map 2: 356whp, 424wtrq
Map 5: 376whp, 396wtrq
Map 7: 400whp, 473wtrq
