Quote:
Originally Posted by Expert@ApexRaceParts
Thank you for the question! The 18x9.5" ET35 is quite an aggressive offset for the rear. It would require fender rolling and negative camber in order to fit properly. Even so, it would be very tough to fit a 275/35-18 tire. Ideally you would want to run an 18x9.5" ET43 in the rear. We have that fitment available in our EC-7 design. Most customer run a 255/40 tire. You could run 265's as well but may require a small fender roll. With that said, 265/40-18 is a touch tall, and 265/35-18 is a touch short. Let us know if you have any other questions
-Matt
|
Any plan to do 18x9.5 ET43 in your SM-10 wheel that I see in your Group Buy? If so, I would be happy to put a deposit down now