|
Was almost there then hit a bump.
Ended up cutting down on the duct so you don't need 7 feet to get this done, 5feet should be enough. I ended up jacking up the front of the car to test the rotation of the duct without the wheel to decide how much duct to cut then the part that stopped me happened. With the wheel on toeing out is fine but toeing in makes the tire hit the duct.
What I think I will do to make this happen is cut the plastic liner to the right of the stock duct so the ducting can be pushed back further in, zip tied in place then the second half would be fine going to the dust shield.
Also got my RBF fluid today and changed my spark plugs
|