Also some more findings in Eibach Springs.. Especially for the X drives.
Eibach now have two sets of springs available for 335xd.
E10-20-031-06-22 20mm/15mm lowering
E10-20-031-05-22 35mm/20mm lowering ( these are the same as ACS springs, hence a bit lower the original Eibachs for Xdrives)
I know ACS say secret ingredients, but its all in the papers, same TUV test, same spring rates, height, material, etc.. Just a different logo!
Take a look below:
If you look Eibach and ACS TUV approvals, you will see those 2 springs are identical and just marketed differently for each brand.
ACS TUV Approval The numbers at the bottom. ACS had a revision where they were using spings -320 up before which rendered the front of the car look higher and then swithced springs to -310 version which is 15mm lower. Same for Eibach, Pre-LCI was spring 06-VA and LCI is 03-VA
Eibach Approval ( the 03-VA is the 05-22 Kit and 06-VA is the 06-22 Kit) See the difference?
Eibach approval for Eibach & ACS ( read bottom right corner, Same springs, different branding)
