After giving myself some time to think it over I have decided to give it a go.
Basically I will keep going until it demands I start taking apart the CV joint bolt or loosening the control arms.
At that point I'll just reverse course and put her back together and call it a day.
Quote:
Originally Posted by johnung
You do seem to be overthinking it. The FaRKle! video especially goes into great detail on the issue. Just make sure that you have the correct tools and give it a go.
I tend to get nervous about accidentally/stupidly scratching paint. So I would put a wide layer of blue painters tape on the fender lip and even up onto the fender itself. Then put a layer or two of duct tape which is thicker and more protective on top of it. The painters tape prevents duct tape glue from getting on the paint. Better to gash tape than paint. Good luck!
|