Quote:
Originally Posted by GENAU
I recently received one of these off of of ebay and am overall not impressed. It came with two metal clips/tabs that have no clear logic of where they would go. One of which I think screws into the bracket that is on the inner fender area. It can screw into the air box or the fender bracket but is nowhere near close enough to be both at once. The black bolts that go to the cover do not fit the holes. The metal screws I assume are meant for the aforementioned clips but they have no mechanism for grabbing anything like a nut. There's locking washers that came with them but for the previous reason they're useless.
There is also an enormous gap between the box and the fender. Is that normal? :
View post on imgur.com
On the upside, the intake pipe and filter all fit great... |
It looks exactly the same as my MST intake so it should only need to be screwed in at the bottom where you removed the black plastic thing to begin with, and then on the back panel of the heat shield (the furthest away from your photo)