Quote:
Originally Posted by atzebmw
It is necessary that you VO code the HU_NBT because only after that the MOST connection will be activated and only then the new Kombi should be visible.
So after the first steps code the HU_NBT, then Read Ecu (not read VCM) and then the second steps.
Otherwise the steps should be correct.
|
Allright, so it should be like this:
1. Connect and click "Read FA" (VO)
2. "Activate FA" (VO)
3. Code (VO) "HU_NBT"
4. "Read ECU" (VCM)
5. Left-Click on "KOMBI" and Click on "Detect CAF for SWE"
6. Select CAFD from latest I-Level
7. Right-Click on the "KOMBI" folder and select "CODE"
?