Quote:
Originally Posted by chuckles01
Really? It worked for me. I was specifically trying to keep the adaptive headlights function, but remove the cornering fog lights. What I did notice is that if the car is not moving, then the adaptive headlights do not swivel left (but they do swivel right). But if the car is moving above a certain speed, then it does swivel both ways.
Make sure only the line in bold is changed from F030enable to F030disable, and the rest are left as it is below. From my testing, if I changed any of the other lines, it disabled the adaptive headlights as well. Hope it works for you!
C_CLC_ENA = F030disable
C_BLC_ENA = aktiv
KL_ENABLE_LI = KL_Ein
KL_ENABLE_RE = KL_Ein
MAPPING_abbiegel_L_output = nsl_l
MAPPING_abbiegel_R_output = nsl_r
|
Thank you so much for this! I ran into the same issue with my adaptive lights not working after I did the code changes to disable the fogs. Changing only the one line you suggested and putting the others back to normal fixed it for me! For reference to anyone else, my car: 2012 F30 328i.