Quote:
Originally Posted by LaNcE01
Navardi,
are you still using the oem turbo housing but bigger internals correct? did you get this done here in AUS? thanks!
|
Yes i am still using the OEM housings but they have been machined to fit the Larger turbine wheel and Compressor Wheel, PS2 apply the same principal. Yea i got the Compressor Housing Machined at Precision Turbos (Blacktown Area NSW) and the Turbine Housing down at AGM Engineering (Emu Plains NSW)
Only thing i found annoying was Precision Turbos had to cut the outlet off to machine the housing, although they can re-weld it back on. i chose not to as i went a slightly different outlet design had a 2 inch to 2.5 inch extender directly welded on.
A break Down on costs
Turbine Housing Machining ($770 AUD)
Compressor Housing Machining ($150 AUD)
Turbo Uprated Rebuild kit (inlcudes Better Journal Bearings and Thrust Bearing Upgrade $300 AUD)
Turbo Balanced ($150 AUD)
Compressor Wheel ($153 AUD)
Turbine Wheel ($170 AUD)
~ Prices May vary slightly ~
I also bought the parts and rebuilt the turbo myself.