Quote:
Originally Posted by M2C
Whow, what a torque curve. 750nm until past 6,000 rpm. If my calculations are correct, this means 700hp to the crank at around 6,500 rpm. And absolutely clean. Almost no timing corrections. And even not too much timing ("just" 14,5 degrees, while others need 16-18 degrees, what could be a risk for the pistons). Must fell like a rocket!
Please do me a favour and do a 100-200 km/h measurement, if possible. I would say sub 6 seconds.
|
Putting a ton of pressure on the pistons too can also be risky too. These cast pistons are sh*t