View Single Post
      11-22-2018, 09:22 AM   #1
7iM3less
Brigadier General
7iM3less's Avatar
Canada
2592
Rep
3,030
Posts

Drives: F80 M3 ZCP
Join Date: Apr 2017
Location: Canada

iTrader: (3)

Just lowered my 328 xdrive on Dinan springs

I spent weeks trying to figure out the drop I would get. At first it was easy tons of members have these springs when you do a search but what I quickly learned was the drops different between the 328, 335, RWD and xdrive. Photos were easy to find for the 335 rwd and xdrive guys but 328's and 330's were tough. A friend of mine has a 328 with the same springs and the back of his car appears to sag lower than the front and this wasn't the look I was going for so i was on the fence about buying them.

Here's my car lowered yesterday morning for those trying to decide (I've done a couple hundred km's already).

Note: I haven't looked into it but it sounds like if you have adaptive this is another factor that can drive the type of drop you get.

From a performance standpoint:
-Body roll almost completely gone
-Very little bounce but when there is the cars quick to level
-Arguably feels "stock", car should have come from factory like this
Attached Images
   
__________________
2016 BMW F80 ZCP
Instagram : 7IM3LESS
https://instagram.com/7im3less?igshid=YmMyMTA2M2Y=

Last edited by 7iM3less; 11-22-2018 at 09:51 AM..
Appreciate 8