Hi again,
Do you perhaps have a guide to what has to be coded?
Edit: nevermind, I'm new to coding and retrofitting and only coded once before. (I coded the kombi to show "m performance" as a test.) So this was like being thrown into the deep end as I have no help but this forum.
I didn't know how to vo code option 430, turns out I just had to fdl code the following:
FEM_BODY 3053 KOMFORTOEFFNUNG_FB aktiv
FEM_BODY 3053 KOMFORTSCHLIESSUNG_FB aktiv
FEM_BODY 3053 KOMFORTSCHLIESSUNG_PA aktiv (not necessary since I don't have comfort acces, but did it anyway just in case)
FEM_BODY 3110 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN aktiv
FEM_BODY 3110 ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN aktiv
+ If you want to decrease initiation delay:
FEM_BODY 3053 KOMFORT_SCHLIESSEN werte = 00
I did also change something else in the same cafd that looked like it is involved with powerfolding mirrors, but I can't remember what. I'm pretty sure now that it isn't required though...
As of now I can confirm that this alternative wiring does work on a f30.
Thanks V.I.P.E.R, this made everything so much simpler.
To all of you who want to do this:
After installing the mirrors but before coding, the mirrors will work partially (ie you can adjust them but won't fold) but the windows stop responding. DON'T PANIC (as i did a little), they will work again after coding the mirrors.
Last edited by KingpinRCR; 04-06-2017 at 02:30 PM..
|