Quote:
Originally Posted by shawnsheridan
There is nothing wrong if you hit "Code" on FEM_BODY, That resets ECU to factory settings. It is a problem though is you hit "Code Default values" or if you hit "Code" on Top of SVT where VIN is instead of FEM_BODY specifically, as then every ECU would be reset, one by one, and if Motor was running, car would stall out when DME was processed, and most likely corrupt DME CAFD.
If FEM_BODY has missing or corrupted CAFD you must try and inject CAFD into ECU and VO Code it.
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.
|
No the car engine was off BUT when code is on sending the car switch off lights and must hit again ones the start button. so for some how the code doesnt work and the second attemp the febmody was red error. thats why i sent you the photo from other post.
ANYWAY i try your solution as always