[Tobz_au]

Wasn’t sure if this would fit. But my rims and tyres finally arrived and I was able to pop them on. I think fitment is excellent, may have been able to go slightly more aggressive in the front but I wouldn’t bother.

There’s maybe 2-3mm clearance between wheel and strut

Looking straight down there is no poke, and there is maybe only 1-2mm of tuck.

This is with KW V3 coilovers, 2.4 degrees front camber and 2 degrees rear.

Wheels are 18x9.5 +33 no spacers - GTC Wheels GT-CX wheels which I believe are exactly the same as the VMR V710 (same factory just rebranded)

Tyres are 255/35R18 semi slicks (tyre size is a bit small as they didn’t come in 255/40)

This is a RWD