I have to take the cable, connect the 10.11 A173 * 10B KCAN2 quick connector pins. Connect the other end of the cable to IHKA3 to pin 22.23.
Cable from old IHKA (pin 22.23) I have to disconnect from conector and connect my new cable
Am I right??
IHKA -> KCAN_H Pin 22 to Pin 34 FEM A173*7B
IHKA -> KCAN_L Pin 23 to Pin 33 FEM A173*7B
IHKA3 -> KCAN2_H Pin 22 to Pin 10 FEM A173*10B
IHKA3 -> KCAN2_L Pin 23 to Pin 11 FEM A173*10B
Best regards
Jarek
Last edited by Siwysdz; 11-15-2019 at 01:28 PM..
|