View Single Post
      06-15-2021, 08:42 AM   #17
Logicoeur
Lieutenant Colonel
Logicoeur's Avatar
993
Rep
1,934
Posts

Drives: F30 335i xDrive
Join Date: Feb 2018
Location: Boston

iTrader: (0)

Quote:
Originally Posted by brigade24 View Post
so many factors...someone mentioned that these cars come with too little tire. I 100% agree. I ran 265 wide all round with -2.9 degrees of camber and at the limit would still notice the outside half of the tires wear out more quickly than the inside half...i usually run about 34psi hot on my re71r.

camber plates and bushings are the two things i have done that have had the most significant impact on tire preservation. the bridgestones you were using are decent tires, they just a bit narrow for the load under transfer.
Are you xdrive?
__________________
F30 335iX | Remus Axleback | Fabspeed Catted DP | VRSF Comp IC | 18X9 ET35 19lb MT1 | 255/40/18 ECS | Ohlins RT Millway Street | Millway Control Arm Bushings | Turner Endlinks | TMH 75mm 14x1.5 Studs | BMW MPerf LSD | XDelete | Pipercross Filter | MHD Stg2 93
Appreciate 1