Thread: Unichip CarPlay
View Single Post
      01-16-2018, 07:50 PM   #95
laggysogxx
New Member
United_States
0
Rep
6
Posts

Drives: 2013 328i xDrive (F30)
Join Date: Mar 2014
Location: United States

iTrader: (0)

Quote:
Originally Posted by Atiqofsweden View Post
Important note, if your car is equipped with the rear combox you have to tell Unichip this, so they can ship the correct cable, see below
Quote:
Originally Posted by acdt View Post
Hi Guys

Bought one from Uni chip tried to install this morning, but didn't work, I have a f80 M3 with H/K sound, as soon as I plug in the box I loose volume on all services, also the screen just stays blank when pressing 8. I proceeded to change the dip switches also didnt work,

Trying to get Uni chip to support but on a Saturday I am not hopeful

Any ideas?

Thanks
Andrew
I ran into a similar problem where I couldn't get the video to work. I believe there are 4 possible configurations for the video resolution. Here's how I got my video to work.

1) Make sure everything is plugged in and installed.
2) Change the dip switches to all HHHHH position.
3) Plug in your iPhone and press 8 button for the carplay shortcut.
4) It probably won't work and will only show black screen.
5) Try 4 different combinations for the dip switch one by one. Leave your iPhone plugged in the whole time. Press the reset button every time after changing your dip switch combo. Try out all combos until you find the working set.
6) After finding the working set, place all the dip switch back to HHHHH position.

I hope this helps.
Appreciate 0