Quote:
Originally Posted by fatboyj711
Spray the IPA or prep solution liberally and wipe down with towels until it's dry. The point of this is to remove as much of the sealant as possible prior to polishing. You likely will not be able to remove all of it if you applied c2v3 recently, so don't stress and over wipe.
Less sealant on the paint will lead to less residue on the polishing pad, which will make each polishing pass more effective.
|
An IPA isn't going to remove freshly applied sealant as it's designed to remove residue.
You'll need a decon wash, clay then use an IPA wipe down to remove the residual.