|
NBT HEADUNIT OWNERS: It has been brought to my attention that there are some slight differences with the NBT model cars. If you have the Touch iDrive controller(where you can draw on the top of it), the CAN wires will NOT be located at the controller. You will need to follow the OP's instructions for location the communication(CAN) wires under the driver's seat.
Additionally, the PIN #'s on the back of the head unit may not work the same. The combinations are:
Red - Pin #18, Shield - Pin #27, and White - Pin #28 (worked for my 2013 non-NBT)
OR
Red - Pin #21, Shield - Pin #23, and White - Pin #24 (worked for a X3 install, should work for other vehicles if the one above does not work)
As always, please feel free to ask/PM any questions!
|