Quote:
Originally Posted by kern417
Quote:
Originally Posted by BPAC306
|
Quote:
Originally Posted by OzBMR
Nice car and quick Draggy times.
Accelerator pedal is 100% from about 2500 RPM but Load Target only gets to where it should be by about 3000 RPM, then overshoots, boost spikes up to nearly 19PSI.
I'd expect a Stage 1 tune to have Load Target to be at around 170 as soon as the pedal was 100%, hit 16 - 17 PSI and hold that pretty well flat through to redline. Apart from that the first run looks pretty good. I think it would get a nicer Timing transition and ramp without the boost spike.
What fuel are you using?
|
yep i see the same thing.
Also, what version are you running? i used to get boost spikes, but v2.0 fixed it for me.
You also have some timing pull on cyl 1. My logs show the same thing. I tried regapping my stock plugs to 0.022" and it helped. You can also try getting fuel from a different gas station to see if the one you used is just lower quality.
|
Running version 2.0
I'll try a different Station and I have new plugs sitting in the counter that need to go in... any issues with that knock?