View Single Post
      08-15-2013, 10:51 AM   #33
Presario's Avatar

Drives: 2018 X3 M40i, 2016 435 GC
Join Date: May 2013
Location: SoCal

iTrader: (3)

Originally Posted by bosbrucec View Post
Can the front spoiler be removed without damage to the factory M sport bumper if the spoiler gets scraped? I'm guessing the glue used will ruin the parts of the M sport factory bumper that are covered by this kit, and, even though this looks good, I'd only do it if it were a sacrificial part that could be removed if scraped and go back to factory, given how low it sits.
I'm totally wondering the same thing. When I lower my car in the near future, I'm worried about the m sport bumper and not the diffuser. My local shop said that they can install it without the betalink and just the double sided tape so that it can be removed later. We would still be utilizing the screws of course. Since the bumper is polyurethane, I'm sure the bends and flexes from the diffuser being sacrificed shouldn't be an issue. I'll most likely be doing this so I can report back with my results.
F36 435i * MINERAL GREY * ///M Performance | G01 X3 * PHYTONIC BLUE * ///M40i