Quote:
Originally Posted by teutf30
After coding, there's no sound, and I'm also getting the Parking Assistance error screen previously shown by Rubber_Ducky:
"No parking assistance, please park unaided. Consult Service Centre"
Injected cafd on the new REM and HU_entry and added VO 507 (rear only for now).
My questions:
1-I'm using psdzdata light - should I have used psdzdata full instead?
2-My car's i-step is F020-15-03-503, but the highest available in psdzdata 4.12.12 is F020-14-03-503 - so I selected this. Could this be the culprit?
3-The only other possible problem I can think of is the wire connection - perhaps a couple of pins are shorted, or not making contact at all - I'll look at that tomorrow. Would the other tool (Rheingold/ISTA) I frequently see mentioned here be useful in diagnosing a possible bad connection?
|
1- Psdzdata lite is all you need. The full version is to flash the ECU.
2- Check this thread, especially post #3
https://www.bimmerfest.com/forums/sh...d.php?t=883416
I would download the most current psdzdata and try again.
3- Try ISTA/d and run a vehicle tests and then view fault. It may give you a sense of direction.