View Single Post
      01-21-2019, 04:45 PM   #5230
shawnsheridan
General
shawnsheridan's Avatar
United_States
10523
Rep
41,104
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by tiix View Post
Hi team,

I am trying to manually update my navigation to MOVE 2018-2 for Europe on my F30 (320i) and the update constantly breaks at 32%. Once it gets to this magic number, the usb stops flashing, and then the upgrade process starts again from 0%.
This has been going on, for 2.5 hours and 5 cycles.
I've tried different usb drives, powering down the car, and powering it up again, reformatting the usbs... nothing helps.

To make matters worst, if I try to use the navigation system now, it doesn't load and gives me the following message:

"Navigation not available. Please connect the usb device with the navigation data and resume update". If I add the USB at this point, it start again to update till 32% and continues to break.

It seems that it is stuck in update mode, but for some reason the update doesnt go past that 32%.

I searched the forums and there is nothing on this topic, so I was wondering if anyone has some idea which can help me.

Thanks in advance.
It is either problem with Head Unit or Map. I would try different map, either different 2018-2 source, or even older 2018-1 or 2017-x builds just to see if it will install.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0