Quote:
Originally Posted by Abi
Hi guys, i have a few questions. i would be appreciated if someone could help me.
I retrofitted NBT Evo with id6(I had hu entrynav).
1. Can I code video in motion alone with esys. Or do I have to pay someone?
2. My PDC sound isn't loud as it was. I tried voluming up but it is the same.
3. I can't see my service history(not showing at all in menu) but it is activated in esys
4. Can I use wifi for something or only for screen mirroring(I have wifi antenna connected)
5. My NBT sometimes restart by him self, is that common issue?
Thanks!
|
1. You will need someone who can enable it via USB or someone who who can script it. This cannot be done through E-sys.
2. Have you tried increasing the volume while it's beeping?
3. You have BKOMBI and it needs to be coded to use KCAN instead of MOST for service history to show up properly
4. Yes but it sounds like it's not coded properly
5. Yes, it's very common on ID4 hardware that was converted to ID5. We've tested a few of these and it seems to happen more on long road trips.
Note that our full fledged ID5 kits do not have any of the issues stated above.