Quote:
Originally Posted by omglol
I solved my problem today. 
Some bastard on eBay sold me (-) paddle for F10 and (+) paddle for F30 ... so I only had to change resistors on (-) paddle. Paddles between F10 and F30 differ not only in resistances, but also on PCB layout, so you need to solder new resistors on different locations ... but you can figure it out with a multimeter very simple and it does not require any modifications. |
Is there anyway you can tell which paddle comes from an F10 and which comes from an F30? Is there a part number on the paddle to check??