Quote:
Originally Posted by sgimips
In terms of disabling the actual high beam bulb; I assume they use it in place of a resistor to provide a load to the car since the shutter mechanism likely draws very little power. A 55W resistor will produce a lot of heat, more so than a 55W bulb. Presumably we could just code off the bulb out error for the high beam and either not install a bulb or leave it in place but disconnected. Or even use a much dimmer/smaller LED if the OEM version has one.
|
That's actually a good idea for turning off reflector part, but than we have another problem during the day. When only DRLs works and the low beam is turned off, you can hear the shutter snapping when flashing, but low beam light is not turning on, only that weak reflector inner part.