Quote:
Originally Posted by Anderw
It will work if your willing to cut about 1+/- inch on either side of your dash board away where the screen goes, and possibly the back of the dash as I'm not sure the shape of the rear bezel of the 10.25 display . I would be 100% sure you want the extra 1.45" at the expense of potentially destroying the dash... just food for thought not saying its the worst idea. it is pretty cool
|
Checkout
http://f30.bimmerpost.com/forums/sho...3&postcount=79
He managed to do it without cutting anything visible from dash.
Looks neat.
Are you sure this works for HU_ENTRYNAV? If it does I'll go that route.