Quote:
Originally Posted by raichean
Any last minute advice before Saturday? I think I have my logs all setup with the suggested values. I have also slightly brushed off the rest on my excel skills on my test log, so I can graph out multi-axis values and actually show them simultaneously.
Also, I *assume* the pulls should be in 4th gear (6MT)? Thought I would double check.. my stock pulls a year ago were on the suggestion of the shop then. My last runs were one in 3rd, and 2 in 4th.
I am going to run logs, plus interior and exterior video just for fun and will compile the video and share that and the logs and dyno graphs here.
|
4th gear all runs if stock FMIC
5th gear all runs if FMIC/DP
Have Dyno operator start progressively at 2000 rpm and logging the dyno run until 6900rpm no less no more
Last but not least, bring a usb thumb drive so you can put your Dyno files in there
Quote:
Originally Posted by F30_SixSpeed
5th gear will yield the most accurate (and usually higher) numbers. It is the 1:1 gear ratio on the 6MT. I would do them in 5th.
Only downfall is if on stock intercooler, car will heatsoak a bit more up top and if the speed limiter is not removed (assuming yours is) it will hit the speed limiter.
|
100% i would dyno in 4th gear if on stock IC for sure
You gotta turn off DSC Off ? since car will prob cut or spin on rollers in Sport+ right?
A few things he can manipulate
- Letting car cool off with hood open
- Cool temps at Dyno or and good air-flow will help
- Leave hood open on Dyno