Managed to get rid of some of the codes. What's left are 3 "informational" errors due to Shift-paddle/Alarm/SOS/ hardware not present. No worries.
But of concern are the last 3 codes, all of them due to replacing ZBE (5-button controller) with a donor
ZBE2 (7-button no-touch controller) and adding a donor
TBX (touch module). Based on my research, the ZBE2
(CON) has to be coded to my car as replacement module. And TBX needs to be added and coded as a new module. Zeitkriterium is 0713 for both. ZBE2's
CAFD has an error when coding with FA. And
TBX does not have a CAFD.
Do I need to "detect CAF for SWE"? How? Do I need to inject a good CAFD in the ZBE2? How do I add a CAFD to the TBX?
I looked at some links on ECU flashing, but I think that's steps above CAFD injecting and really necessary?
Would this be the first thing to try for the ZBE2 (using E-sys 3.27.1.)?:
- Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on ZBE2 => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on ZBE2 (the ECU itself not the underlying CAFD) => Select CODE.
https://www.bimmerfest.com/threads/f.../#post-8737312
https://www.bimmerfest.com/threads/h...o-dme.1320439/