Quote:
Originally Posted by drhousedk
If you can't see SM you probably wired the CAN wires to the wrong CAN. Post 06/2013 SM expects CAN2. You can tap into that on pin 9 and 11 on the headunit (yellow/brown and yellow/red wires). Then you'll see the SM.
Regarding missing lumbar and width, that's due to the red wire (0.75) in pin 1 under the seat not getting power. Give that 12v, and it'll work.
|
sorry to butt in guys but I am in the same situation realised that seats need Can 2 but I have used Can 1 (2013 car) and cant see SM, if I change to Can2 will 2013 car automatically communicate with SM. Have coded the electric seat option. seats move ok, no heat no memory option except for memory positions from doner car. thanks