Quote:
Originally Posted by Brotherhef
You think 245 rubber on a 9" et30 be a concern of rubbing during super hard corner since it would sit more flush under the fender? I don't think it would be, but wanted to check.
|
no it won't rub. the stock wheels are 225 on 8" and there's boatload of clearance. Ive raced on a 245 and there was zero rubbing...keep in mind I was on coilovers so stiffness helps. i also ran a lower aspect ratio to help with clearance but it was never an issue.
I ran a 255 on stock suspension and there was no rubbing there either. i used a 34et wheel with 3mm spacers all round and there was no rubbing.
if your suspension setup allows, I would consider running a 255 with et30 assuming you have provisions to adjust camber, especially in the front.