Quote:
Originally Posted by Frogman
Sometimes E-Sys just won't connect.
When that happens to me, disconnect the cable, turn the car completely off and let it sit for about 15 minutes for it to completely shut down.
Then try again. That has always worked for me.
If it doesn't, then maybe you may have a bad cable.
Also, I think I remember seeing somewhere from Shawn that really old psdzdata can also cause this. Upgrade to E-Sys 3.24.3 and psdzdata 53.3 and try again.
|
I am going to try it again tonight before going to bed to see if it works. I was hestitated to install new Esys because the new errors I might get. And I already know my current Esys set up has worked before.