Quote:
|
Originally Posted by mbanks21
Quote:
|
Originally Posted by Dejan_
Quote:
|
Originally Posted by kpeng
Quote:
Originally Posted by mbanks21
Did he have to remove the bumper or can you slide it in from underneath (that's what she said)?
|
Remove the underpanel, the intercooler itself is only held in by two torx (I believe) screws and then you just remove the two pipes. Done. |
Little more to it then that but pretty much. He's gonna struggle with the 2 plastic clips that hold the horseshoe clip on the inlet pipes. This has to be removed as well before just dropping down. Also highly highly suggest replacing the o rings if you have any type of mileage north of 35-40k especially pushing harder boost.
Boost leaks will plague you to death. Do the o rings while the intercooler is down. |
Less than 10k miles here. For $200 can't really go wrong. |
Yup there you go. I'd do it if I didn't have one. I bought mine used out of a lease part out but $200 even if it's bad I wouldn't lose any sleep over it.