View Single Post
      01-15-2019, 02:42 PM   #4
Jarek@JRAuto
BimmerPost Supporting Vendor
Jarek@JRAuto's Avatar
Canada
203
Rep
116
Posts


Drives: F30 340i
Join Date: Feb 2011
Location: Oakville, Canada

iTrader: (0)

Quote:
Originally Posted by Dwhoz View Post
Hi Jarek,

So, I saw that you have recommended wifi obdii and k+dcan adapters, but do we need to use those, or will others be compatible? Just want to make sure I'm ready to rock and roll when things go live.
Required hardware:
K+DCAN cable + OTG USB adapter it is strongly recommended to use cable/USB connection for the first unlock flashing procedure WiFi connection may by not stable in the areas where signal is overloaded with other WiFi signals
OBD II WiFi Dongle powered by THOR - THOR WiFi is the only dedicated adapter for MG flasher, as our app has been tested extensively with it.

Europe: www.bimmer-connect.com
US: www.bimmergeeks.net/cables

We recommend the tested K+DCAN Pro Cable from Bimmergeeks. Furthermore the, OTG USB adapter can be purchased from above sources along with K+DCAN cable or separate from Amazon or other suppliers. Make sure you purchase a good quality cable as some cables sold on the open market are of poor quality/design and could lead to complications during the flashing process.

Last edited by Jarek@JRAuto; 01-23-2019 at 02:45 PM..