Hello Guys,
Any help would be much appreciated.
My car is a 2016 328i with stock grey brembo four piston at front and normal single piston break at the rear.
Installed M Performance brakes today and coded DSC by adding SPBR but the brakes still feel too spongy. Its taking more than 50% of the pedal travel to stop the car and feels worst than my stock. Also it feels like all four brake calipers are holding up the wheel even after I let go of the brake pedal.
Couple of observation ...
1. After I have added SPBR, under aftermarket retrofit I see SPBR_19_ZOLL_SPORTBRAKE instead of 18
2. Under DSC module FDL is there only for front and set to initwerte 0 and rear is not present.
Any help please. Thanks.
__________________
Click appreciate if this post has helped you
Retrofits: NBT evo ID6, 6wb cluster, heated steering wheel, HUD, Kafas2 with LDW, SLI, HBA, FCW and pedestrian warning, LCW, Surround View, Parking Assist and ACC with Stop
|