View Single Post
      05-08-2021, 08:07 AM   #7
Wires
Brigadier General
Canada
855
Rep
3,256
Posts

Drives: 2016 340i xDrive
Join Date: Apr 2008
Location: Calgary

iTrader: (0)

I'd check for codes first. The DME will trap errors on coils not functioning properly, misfires, etc.

You can just pull out one of the good coils and compare to your suspected bad one if you are looking to validate resistance. I'm just saying I've seen in high voltage devices like this where they test fine on the bench, apply power and they arc inside.
Appreciate 0