Coding reversing camera via Bimmercode
Just installed an aftermarket reversing camera to my F30 with NBT headunit.
I now need to do the coding, but only have Bimmercode.
I've been given the below instructions to code.
REM_01 > PdcParkMasterVar 3203 > RVC = wert_02
REM_01 > PdcVarCoding 3200 > PDC_VORHALT_2 = aktiv
HU_NBT > EXBOX 3001 > AUX1_IN_HU = wert_255 [Default]
HU_NBT > EXBOX 3001 > CAMERA_SYSTEM = trsvc
HU_NBT > EXBOX 3001 > MACRO_RV_C = aktiv
HU_NBT > EXBOX 3001 > TRSVC = wert_81
The problem is that there is no activ option on my car REM_01 > PdcVarCoding 3200 > PDC_VORHALT_2, it just says wert_01.
Does anyone know what I can do as I just have blank video coming through when I select reverse.
|