F30 passenger blinker not working after Umnitza blackline tailight install
I put the lci black line tail lights in. They worked for hours while I was doing sales calls. Suddenly the right rear turn signal wouldn't work and started fast blinking like a bad bulb. So I messed around with it and realized no power at terminal connection for turn signal from factory passenger side outer harness. I disconnected battery waited 15 minutes and still doesn't work. I pulled bumper cover to check wiring. unwrapped factory tape, all looks good no corrosion or breaks. I put all the stock lights back in, disconnected battery waited 15 min and still doesn't work. Now my error comes on showing bad turn signal on passenger and L/R secondary break lights have errors. However, with the umnitza black line lci lights in car, as soon as I turn on, not start, the outer signal on pass outer blinks fast about 5 times, showing that the wire has continuity. Do I need to have a coding guy check things out? I'm stumpers. Please help.
|