Quote:
Originally Posted by terryd5150
I'm looking to do something very similar.
What are you using to control the WMI system?
|
Originally I had the JB4 as a WMI controller but it wasn't progressive and I wasn't using the features of it. Meaning I wasn't doing boost control + WMI from it, just activate WMI at a certain boost. Their feature-set is cool if you have MHD and want to try it out. I then switched to the AEM controller since I wanted to use it with bootmod3.
https://www.aemelectronics.com/sites...structions.pdf
I used a p3 boost tap which takes the boost pressure into the controller. It wasn't hard at all, cool learning experience.
I highly recommend the stealth tank from burger tuning, it's cool and saves all trunk space. If you don't care about trunk space AEM has a 5 gallon tank that sits on the trunk.
I also have the new bms chargepipe which works well, the nozzle position is further from the throttle body vs the bms chargepipe spacer. I recommend any chargepipe where the bungs are before the sensors and further away.