Quote:
Originally Posted by sspade
You need one gasket and two clamps to do it properly. Looks like you linked the proper ones.
As Mike said, you may find that your clamps or gaskets come off easy and are in good, reusable condition - like mine were. But you have no way of knowing until its two late.
|
Quote:
Originally Posted by sspade
You need one gasket and two clamps to do it properly. Looks like you linked the proper ones.
As Mike said, you may find that your clamps or gaskets come off easy and are in good, reusable condition - like mine were. But you have no way of knowing until its two late.
|
Thanks for the reply! What about those M8 nuts and I assume bolts that go with them. Those are the types of fasteners that seem to always rust out and seize together on exhaust systems. Any issues on yours? Any idea on the bolt size? Thanks again!