|
So I did a few tests, night time coding to see the effects of different voltages. 100% definitely throws out less light then 13.7 V. You would think 100% is exactly what it means, but the difference when you use 13.7 V is pretty significant. So I’ve used 13.7V in every LED I installed, apart from the ones which will only allow 100%, the front fogs I coded to 13.7V and it also puts out a much greater light then the 100% setting. Also there is no flickering, but I wouldn’t go to 14V or above as billfitz said, as there is a risk the LEDS will burn out or not last very long. Mine have been in for almost 2 years with no issues
__________________
Martin
|