Quote:
Originally Posted by JaxD
So I recently did some mods to my 2013 328i xdrive. I installed an injen intake and put in a cts blow off valve. https://www.ecstuning.com/b-cts-part...ctsbv0015~cts/ the installation went perfectly except for 1 error. Basically, the instructions show it being installed on a n20 with the mechanical wastegate. My bov is set up exactly like the diagram below however I couldn't find any vacuum lines like on an n20 with a mechanical wastegate! Does anyone know where the vacuum lines on the n20 are routed with the electronic wastegate or if there even are any? I haven't had much luck online or digging around the engine but I've been pressed for time so I may have missed something. Currently instead of running the vacuum line from the solenoid to a vacuum tee its running into my intake. I added a link for videos if anyone's interested in sound. https://photos.app.goo.gl/hjErfy1ZHxbyQWF79 |
I'm having the same problem could you tell me what exactly you did to get it to work? I can't figure out where to put the vacuum lines.