Quote:
Originally Posted by QQ
Car made 168kw and 319nm out of factory on the same dyno - factory figures are supposed to be 160kw and 310nm.
Car is stock yes. Only BMS Stage 2 with Map 1 = 20psi. (This is +3 psi, as stock is 17psi). Map 2 is 21 psi (+4psi) and map 7 is 23 psi (+6psi). I need the flex fuel wires for more boost than map 1, as the car is running slightly lean on map 1 with my fuel mix.
20% ethanol 95/E5 and 80% 95RON pump fuel. The ethanol is the same grade we use here in our gas appliances. We do not have E85 in our country.
|
I don't have Ethanol here too, so can I use normal Ethanol, if so how much should I put with RON92 and will it damage my system ? my mods are bms st1, afe dry filter and scoop