Quote:
Originally Posted by joq3
That was what I was thinking too. Why not put it somewhere behind the head unit. And cut the wires that should to in the asd, make a plug or solder it.
Is it possible to make a plug?
Where should I take 12v from?
EDIT: And also K-CAN2, or is K-CAN2 and 12V included in the Rheingold blueprint?
|
Ah yes, you are right. The 12V and K_CAN2 connection was missing on the diagram.
Here it is.
According to this wiring diagram the 12V should taken from F120 in the trunk.
So there is only one cable which must be routed to the front.
And yes, it's also possible to make a plug with the parts from the other thread.