Quote:
Originally Posted by sgimips
Presumably we could just code off the bulb out error for the high beam and either not install a bulb or leave it in place but disconnected.
|
This is what I was wondering too. Although the high beam reflector would still be illuminated a bit from the LED corona ring.
Quote:
Originally Posted by sgimips
I’m trying to figure out what is there on the OEMs. It looks like another projector or maybe just a plastic lens that’s tinted. It’s hard to find high resolution images of the OEM lights with that much detail. Is there any light at all on that side?
|
The inner part of the OEM unit has a black plastic housing ring behind the corona ring, and then a "tinted" lens like you said, but I don't think you can see through it. There is no light that comes out of that lens, I think it's purely for aesthetics/consistency. On my previous F30, I did the OEM xenon retrofit, but didn't wanna go that route again for this F30. Below is a post from the OEM retrofit thread, the last pic has a sort of good quality image of the OEM headlight.
https://f30.bimmerpost.com/forums/sh...&postcount=114