View Single Post
      07-11-2019, 07:40 AM   #378
Jarek@JRAuto
BimmerPost Supporting Vendor
Jarek@JRAuto's Avatar
Canada
204
Rep
124
Posts


Drives: F30 340i
Join Date: Feb 2011
Location: Oakville, Canada

iTrader: (0)

𝗠𝗚 𝗙𝗹𝗮𝘀𝗵𝗲𝗿 𝘂𝗽𝗱𝗮𝘁𝗲 𝘃𝗲𝗿 𝟭.𝟯.𝟭

MG Flasher update ver 1.3.1 is now Live with our custom code “Dynamic Burble On The Fly”

Existing users, please synchronize your App and update\flash new OTS maps to ver. 1.4 and E30 OTS maps to ver 1.1. Just before flashing you will be informed that the procedure will take approximately 20 minutes. This is a one-time 20 minute flash that will not occur again unless new updates are released in this specific code.

New Users will receive automatic activation when car/ECU is unlocked with the Flashing License.

This option is also available for custom tunes and is enabled with the purchase of a Flashing License.

With this function, flashing your car every time you want to adjust the intensity of the burbles is a thing of the past! Via a simple combination of the Driving Experience Switch and the MSA button you can change the intensity of the burbles ON THE FLY!

There are 4 switchable levels available.

Watch our instructional video on Youtube or Facebook page to see how it works and read below for more info!

Important Notes:

1. The car must be running for this function to work.
2. The car must have been running for longer than 10s to begin selecting as described below.
3. The car must be above 50 degree coolant temperature for burbles to activate.
4. Drive Mode must be enabled, manual mode deactivates the selection process.
5. You must press the MSA button twice within 2.5 seconds for it to be a valid selection.
6. The burble level adjusted by the Aggressiveness Slider during your last OTS map flash will be the default aggressiveness adjustment without any of the above mentioned selections. This "default" mode will be activated each time when vehicle is started after sleep mode.

Application Details:

• Level 1 - Switch to ECO Mode via the Driver Experience Switch and push the MSA button twice within 2.5 seconds. Then you must return to Sport or Sport + mode to hear the changes. This level will be equivalent to a 20% increase in slider adjustment.

• Level 2 - Switch to Comfort Mode via the Driver Experience Switch and push the MSA button twice within 2.5 seconds. Then you must return to Sport or Sport + mode to hear the changes. This level will be equivalent to a 40% increase in slider adjustment.

• Level 3 - Switch to Sport Mode via the Driver Experience Switch and push the MSA button twice within 2.5 seconds. The changes should be heard immediately, given that you are already in Sport Mode, where burbles are active.
This level will be equivalent to a 70% increase in slider adjustment.

• Burble OFF - Switch to Sport Mode + via the Driver Experience Switch and push the MSA button twice within 2.5 seconds. Burbles will now be fully deactivated.

• Default Mode – To switch back to your stock/default settings (depending on your slider positions) you must simply hold the ESP button until it is fully deactivated then push the MSA button twice within 2.5 seconds.



Last edited by Jarek@JRAuto; 07-11-2019 at 02:45 PM..