View Single Post
      06-30-2015, 08:26 AM   #3
snj49er
First Lieutenant
102
Rep
335
Posts

Drives: '20 M5C
Join Date: May 2014
Location: Western NC - 28804

iTrader: (1)

Quote:
Originally Posted by TSiSPY007 View Post
Hey guys, hope the wheel fitment gurus can help me with a few tips... can't find a definitive answer after searching a bit and am a bit confused now, actually... so please bear with me.

I have a 2013 335i xDrive (M-Sport). Looking at purchasing wheels soon. Considering the Avant Garde M510's or M580's. As an example, for the M510's would the following be the correct fitment if I'm not lowered yet but plan on lowering by about 2" in the next 6-12months? 5x120 19x8.5" et35 fronts and 5x120 19x9.5" et33 rears, looking at running 225/40-19 front tires, and 255/35-19 rear tires? How 'bout if I get some mild spacers for my factory M-sport 18's (400m, square), could/would I use the same spacers with such a set of 19's? And, if not, then what would be a better offset to get?

Thanks!
It depends on the look you're after. The rears in this picture are 255/35-19 on 19x9.5" ET35 wheels. The ones that you selected would extend out 2mm further. If it was my choice (and they were available) I'd go with ET40 wheels which would pull them in 5mm from the pic. You could easily go up 10mm in tire width front and rear if you wanted to consider that.
Attached Images
 
Appreciate 0